Cold Process Soap Using Exotic Butters & Oils (Sensitive To Normal Skin) BCI0706
Hallstar
Preparation:
Prepare moulds and any other ingredients in advance. Phase A: Dissolve lye in the distilled water (Add the lye slowly to the water – it will react immediately with the water and get very hot!) Let this mixture cool to 55°C. Phase B: Separately, heat oils to 55°C. Melt the exotic butters with the oils until clarified (approximately 55°C max). Carefully add phase A to phase B at 55°C; stir until trace (thick slurry). Stirring can take up to 1 hour using a mixer. At trace add the essential oil. Stir to mix thoroughly and pour into moulds. Insulate with covers and allow to rest undisturbed for 24 hours. Unmould and cut into desired shapes. Cure for at least 3-5 weeks.Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
LipoTrue opens the door to further and more innovative science and technologies, overflowing with new concepts and novel active ingredients the dynamic and fast-changing cosmetic market. LipoTrue acts as a central R&D engine integrating cutting edge technology platforms in order to provide advanced active ingredients with proven and solid...
Connex-C Asia 2025
Lee Kong Chian School of Medicine - Ong Tiong Tat and Irene Tan Liang Kheng Auditorium 11 Mandalay Road, Level 4, Singapore 308232
31 July - 1 August 2025
IFSCC Congress 2025
Palais des Festivals, Cannes
15th - 18th September 2025