Soothing Antiperspirant Deodorant Roll-On

Phase
Product
INCI Name
Supplier
Volume
A
Natrosol 250 HH GF 1
Hydroxyethyl cellulose
0.30
Denatured Ethanol
Alcohol, Denat.
25.00
B
Water purified
Water / Aqua
to100
C
Reach 301L 2
Aluminum Sesquichlorohydrate
40.00
D
Zemea 3
Propanediol
3.00
CP Oat Avenanthramides 4
Aqua, Glycerin, Oat (Avena Sativa) Kernel Extract
0.50
E
Fragrance
Parfum
qs
Cremophor RH 40 5
PEG-40 Hydrogenated Castor Oil
qs

Preparation:

Method of Manufacture: Disperse the hydroxyethyl cellulose in the alcohol of phase A, whilst stirring. Heat the water of phase B to 65 – 70°C and add to phase A to fully hydrate the hydroxyethyl cellulose with stirring. Add phase C, followed by D with mixing. Pre-mix the fragrance with the PEG-40 Castor Oil at a suitable ratio (1:3 – 1:5 is likely) and mix well into the base. Fill into roll-on containers.

Notes:

Suppliers: 1. Ashland Aqualon 2. Summit Reheis 3.Dupont 4.Oat Cosmetics 5.BASF
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.