Conditioning, Antibacterial Body Cleanser
Preparation:1 In a premix container, disperse the polyquaternium-10 in water and heat to 50-60°C to fully hydrate the polymer. 2 Add SULFOCHEM™ ALS (ammonium lauryl sulfate) and SULFOCHEM™ ES-2 (sodium laureth sulfate) to main container and mix with propeller agitation. 3 Heat to 60°C. 4 Add citric acid and triclosan and mix until dissolved. 5 When uniform, add the polyquaterium-10 solution to the main container. 6 Then add AMIDEX™ CME (cocamide MEA), GLUQUAT 125™, GLUCAMATE DOE-120™, and tetrasodium EDTA to the batch in that order, waiting for each ingredient to dissolve before adding the next. 7 Cool to 40°C and add preservative and fragrance.
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.