COLD PROCESS SOAP USING SHEA BUTTER(FOR DRY SKIN)

Hallstar

Phase

Product

INCI Name

Supplier

Volume

Distilled Water

24.0

Lye

8.9

Macadamia Oil

16.7

Olive oil – Certified Organic

25.1

Aloe Butter

11.7

Shea Butter – Ultra Refined™

13.2

Chamomile Butter

0.4

Preparation:

Prepare moulds and any other ingredients in advance. Phase A: Dissolve lye by adding slowly to the water. (The lye will react immediately with the water and get very hot!). Allow mixture to cool to 55°C. Heat phase B separately to 55°C. then melt phase C until clarified (approximately 55°C max). Once both mistures are at 55°C, carefully add phase A to combined phase BC, then stir, using a mixer for up to 1 hour, until trace (thick slurry). Add the essential oil. Stir to mix thoroughly and pour into moulds. Insulate with covers and allow to rest undisturbed for 24 hours. Cut into desired shapes and cure for at least 3-5 weeks.

Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.

Featured Supplier

P2 Science is a leader in green chemistry — creating high-performance, clean ingredient solutions for the beauty and personal care industry. Citropol® is P2’s signature line of sustainable, high-performing liquid polymers, which imparts multi-functional benefits to hair, skin, fragrance, and color cosmetics, and is derived from the natural oil of...

Learn more »