‘REFRESHING LOOK’ EYE CREAM

Phase
Product
INCI Name
Supplier
Volume
A
Ultragel™ 300
Polyquaternium-37
0.9
Dehyquart® F 751
Distearoylethyl Hydroxyethylmonium Distearoylethyl Hydroxyethylmonium
0.5
Cutina® MD1
Glyceryl Stearate
1.0
Cutina® PES1
Pentaerythrityl Distearate
1.0
Cetiol® Sensoft1
Propylheptyl Caprylate
2.0
Cetiol® SN1
Cetearyl Isononanoate
2.0
Cegesoft® PS 61
Olus
2.0
Copherol® F 1300 C1
Tocopherol
0.5
B
Glycerin
Glycerin
3.0
Water, demin.
Water
84.0
C
Biophytex® LS 98321 provisional
See datasheet
2.0
Euxyl PE90102
Phenoxyethanol, Ethylhexylglycerin
1.0
Perfume
Parfum
q.s.
KOH (10 %)
Potassium Hydroxide
0.1

Preparation:

Heat the oil phase A (with Ultragel 300) to 80-85°C and mix homogeneously. Heat phase B the 80-85°C and add to the oil phase while stirring. Allow the emulsion to cool while stirring in such a way that it remains in continuous motion. Avoid the incorporation of air. If necessary homogenise with a suitable dispersion unit (e.g. Ultra Turrax) approx 55°C. Add the components of phase C at 40°C. If necessary adjust the pH value. Stir while cooling to 30°C.

Notes:

Properties pH-value (as is): 5.2 Viscosity: 100000 mPa·s (Brookfield RVF, 23°C, spindle TE; 4 rpm, Helipath) Suppliers 1 Cognis 2 Schülke & Mayr
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.