LAMCO111 HAIR REGENERATING CREAM

Phase
Product
INCI Name
Supplier
Volume
A
Aqua
to 100
Propylene Glicol
0.50
Glycerin
0.50
ESAFLOR HM22
C18-C22 Hydroxyalkyl Hydroxypropyl Guar
0.30
Citric Acid, 10% Solution
to pH 5
CRODAMOL ICS
Isocetyl Stearate
1.00
Paraffinum Liquidum
1.50
B
VISCOLAM AT100P
Sodium Polyacryloyldimethyl Taurate, Hydrogenated Polydecene, Trideceth-10
3.00
C
Cetrimonium Chloride
1.50
SALCARE SC10
Polyquaternium-7
1.00
Preservative
0.50
Parfum
0.20
Citric Acid, 10% Solution
to pH 3.5

Preparation:

add the ingredient of phase A (A1,A2,A3) in the given order; under stirring add Esaflor HM22, adjust pH around 5 and let the polymer swell for 20 minutes. When the polymer is completely wetted, add the remaining ingredient of phase A and then add Viscolam AT100P, always under continuous mixing (in this formulation Viscolam AT100P doesn’t need a high shear to form the emulsion). Finally adding the Cetrimonium Chloride, you will find a decrease in emulsion viscosity due to the cationic nature of the conditioner, give some minutes to Viscolam AT100P to recover his structure. When the cream surface has a smooth aspect, add the remaining ingredient and adjust the pH around 3,5.

Notes:

Appearance: white cream pH: ~ 3,5 Viscosity (Brookfiled, 5rpm, 25°C): ~ 43000 mPa*s
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.