Pearlized Conditioning Shampoo With Floraesters K-20W Jojoba

Cargill Beauty

Floraesters K-20W Jojoba contributes to the moisturizing and conditioning properties of this white, pearlized shampoo. This high-foaming shampoo feels creamy and smooth, is easy to rinse out, and contains a fragrance specifically selected for the Asian market.

Phase

Product

INCI Name

Supplier

Volume

Deionized Water

Water

- - - - -

q.s.

Versene® Na2 Crystals

Disodium EDTA

The Dow Chemical Co.

0.05

Propylene Glycol USP/EP

Propylene Glycol

Ashland, Inc.

1.00

Preservative1

- - - -

q.s.

Ucare® Polymer LR 400

Polyquaternium-10

The Dow Chemical Co.

0.20

Amidex® CME Surfactant

Cocamide MEA

The Lubrizol Corporation

2.00

Citric Acid, USP (30% solution)

Citric Acid (and) Water

Archer Daniels Midland Company

0.60

Pluracare® L-64

Poloxamer 184

BASF Corporation

0.05

Lipo® EGDS

Glycol Distearate

Lipo Chemicals

2.00

Chembetaine® C Surfactant

Cocamidopropyl Betaine

The Lubrizol Corporation

10.00

Sulfochem® ES-2 (2 mole) Surfactant

Sodium Laureth Sulfate

The Lubrizol Corporation

35.00

Floraesters K-20W Jojoba

Hydrolyzed Jojoba Esters (and) Water (Aqua)

Floratech

3.00

Preservative2

- - - -

- - - - -

q.s

Fragrance3

- - - -

- - - - -

q.s

Preparation:

Mixing Procedure 1. Add the Versene Na2 Crystals to deionized water with propeller agitation at room temperature and allow time to dissolve. 2. Add the Propylene Glycol USP/EP, Preservative, and UCARE Polymer LR 400 of Phase A, in that order, with propeller agitation. Heat mixture to 70-75°C. 3. With propeller agitation at 70-75°C add the ingredients of Phase B to Phase A in the order listed. Continue to mix until the batch is uniformly white in color and homogeneous. 4. Allow the batch to cool while stirring to room temperature. Measure final pH and viscosity at 25°C. Note: Sodium chloride is not added to modify the viscosity of this formula. Floraesters K-20W Jojoba has a strong effect on the final viscosity. If a lower viscosity is desired, a small amount of sodium chloride solution may be added after the batch is completed.

Notes:

Typical Properties: pH: 5 - 6 Viscosity: 14,000 - 23,500cP 1 Preservative: Sodium Benzoate NF-FCC Dense (INCI: Sodium Benzoate) supplied by American International Chemical 2 Preservative: Bronidox® 1160 (INCI: Phenoxyethanol) supplied by BASF Corporation 3 Fragrance: Reference #03294 supplied by Innovation Corporation

Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.

Featured Supplier

Elementis is a global specialty chemicals company driven by scientific innovation to deliver ingredients that enhance the performance and value of our customers' products. A world renowned expert in rheology technology, Elementis is also the global leader in antiperspirant actives. Elementis' portfolio of green products includes natural clay...

Learn more »