Moringa Butter Moisturizing Body Masque

Cargill Beauty

The following formula allows the formulator to vary sub-component phases that lend one or more aesthetic and performance characteristics. This chassis couples the wax-ester character of Floratech’s wide range of natural ingredients with traditional glycerides, fatty acids, poly alpha olefins, silicones, and silicone powders. By varying these sub-component phases, the formulator can match marketing needs for natural content with specific performance points for slip (silicones), longevity of wear (poly alpha olefins), moisturization (glycerin and Floraesters K-100 Jojoba synergy), and matte finish (Floralipids Moringa Butter).

Phase

Product

INCI Name

Supplier

Volume

Deionized Water

Water

- - - - -

q.s.

Versene® Na2 Crystals

Disodium EDTA

The Dow Chemical Co.

0.10

Zemea® Propanediol

Propanediol

DuPont Company

4.00

Glycerin, USP

Glycerin

The Dow Chemical Co.

1.50

Aristoflex® AVC

Ammonium Acryloyldimethyltaurate/VP Copolymer

Clariant Corporation

0.50

Floralipids Moringa Butter

Moringa Oil/Hydrogenated Moringa Oil Esters

Floratech

8.00

Dow Corning® 2503 Cosmetic Wax

Stearyl Dimethicone

Dow Corning Corporation

1.50

Performalene® 400 Polyethylene

Polyethylene

New Phase Technologies/ Baker Hughes

1.00

Jeesilc® DMC 19

PEG/PPG-18/18 Dimethicone

Jeen International Corporation

1.50

Performacol® 425 Alcohol

C20-40 Alcohols

New Phase Technologies/ Baker Hughes

1.00

Lexemul® 561

Glyceryl Stearate (and) PEG-100 Stearate

Inolex Chemical Co.

2.50

Palmitic Acid 95% FGK

Palmitic Acid

Acme-Hardesty Co

1.00

Myristic Acid 98% FGK Flakes

Myristic Acid

Acme-Hardesty Co

1.00

Crodacol® CS50

Cetearyl Alcohol

Croda, Inc.

2.50

Floramac 10

Ethyl Macadamiate

Floratech

3.00

Floraesters 30

Jojoba Esters

Floratech

10.00

Floraesters K-100 Jojoba

Hydrolyzed Jojoba Esters (and) Jojoba Esters (and) Water (Aqua)

Floratech

0.35

Gransil® SiW-050

Isododecane (and) Dimethicone (and) Polysilicone-11 (and) Coco-Caprylate/Caprate (and) Water (and) Butylene Glycol (and) Decyl Glucoside

Grant Industries

5.00

Preservative1

- - - - -

q.s.

Fragrance2

- - - - -

q.s.

Sepigel® 305

Polyacrylamide (and) C13-14 Isoparaffin (and) Laureth-7

Seppic

1.00

Preparation:

1. Combine all ingredients of Phase A, except the Aristoflex AVC, at room temperature with moderate propeller agitation. Slowly add the Aristoflex AVC and heat to 80°C. 2. Combine all ingredients of Phase B. Mix at 80°C until completely melted and uniform. 3. Slowly add Phase B to Phase A with moderate propeller agitation at 80°C. 4. Homogenize at 80°C. 5. Remove from heat and cool to 65°C with moderate propeller agitation. 6. Add Phase C and mix thoroughly until the Gransil SiW-050 is dispersed completely. 7. Cool to 45°C and add Phase D with moderate propeller agitation. Cool to room temperature.

Notes:

1 Jeecide CAP-5 [INCI: Phenoxyethanol (and) Caprylyl Glycol (and) Potassium Sorbate (and) Water (and) Hexylene Glycol] supplied by Jeen International Corporation 2 Fragrance: Green Floral ORC0801045 supplied by Orchidia Fragrances Typical Properties: pH: 5 - 7 Viscosity: >125kcP Note: The information herein is based on our research and the research of others and is believed to be accurate. No guarantee of accuracy is made and the products are provided without warranty, expressed or implied and upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes. Likewise, statements concerning the possible use of these products are not intended as recommendations to use these products in infringement of any patent or in the treatment, prevention, or cure of any medical condition. INCI/trade names must be verified with each manufacturer. (Cleared for Public Disclosure)

Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.

Featured Supplier

SNF, headquartered in Andrézieux, France, is a leading global producer of water-soluble polymers with primary manufacturing sites in France, the USA, and China. Over the last 40 years, SNF has developed expertise in polymer chemistries designed for specialty markets, such as personal care and cosmetics.
SNF’s Personal Care Division offers a...

Learn more »