24 H INVISIBLE ANTIPERSPIRANT STICK

Phase
Product
INCI Name
Supplier
Volume
A
VARONIC® APM (2)
PPG-3 Myristyl Ether
5.00
VARONIC® APS (2)
PPG-11 Stearyl Ether
5.00
TEGO®Alkanol 18 (2)
Stearyl Alcohol
16.25
Cutina HR
Hydrogenated Castor Oil
1.75
B
Cyclopentasiloxane
Cyclopentasiloxane
47.00
C
Locron P
Aluminum Chlorohydrate
20.00
AEROSIL® R 972 V (1)
Silica Dimethyl Silylate
3.00
D
TEGO® Deo LYS (2)
Zinc Ricinoleate & Lysine & Propylene Glycol
2.00

Preparation:

Procedure Melt Phase 1 at 80-85°C and stir until a clear phase is obtained. Cool Phase 1 to 75-78°C. Add Phase 2 while stirring and stir for another 15 min. While stirring, add Phase 3 to Phases 1 and 2. Stir until Phase 3 is homogenously dispersed. Add Phase 4 and stir for another 5 min. Compensate loss of Cyclopentasiloxane prior to filling (temperature = 68-70°C).

Notes:

1) Degussa AG, Aerosil & Silanes. 2) Degussa Goldschmidt Personal Care.
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.