SO SATIN! COMFORT LIPSTICK
Preparation:Warm phase A to 35°C and disperse in a three-roll mill. Set aside. Prepare phase B by dispersing and stirring Covafluid FS in Eutanol G at room temperature. Add phase C to phase B and heat to 85°C until dispersed and homogeneous. Add phase A to combined phase BC using a propeller blade mixer; mix until homogeneous. Combine phase D ingredients and add to combined phase ABC. De-bubble at 85°C. In a separate container, combine phase E and heat to 70°C with stirring until completely transparent and homogeneous and add to combined phase ABCD. Then add phase F using an antideflagration installation. Pour into a warm (35°C) lipstick mould at 85°C. Cool and put into an appropriate lipstick component.
Notes:Suppliers 1 Dow Corning 2 LCW Sensient 3 Cognis
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.