ANTI-AGEING DAY CREAM O/W 30/CLFCE 4739/05

Symrise Pte Ltd

Phase 
A
ProductINCISupplier%
Emulsiphos® (677660)Potassium Cetyl Phosphate, Hydrogenated Palm Glycerides11.00
PCL-Liquid 100 (660089)Cetearyl Ethylhexanoate11.00
Tegosoft TNC12-15 Alkyl Benzoate23.00
Neutral Oil (162412)Caprylic/Capric Triglyceride18.00
Copherol 1250Tocopheryl Acetate30.50
Lanette OCetearyl Alcohol32.00
PCL-Solid (660086)Stearyl Heptanoate, Stearyl Caprylate11.00
Dow Corning 246 FluidCyclohexasiloxane42.00
Neo Heliopan® BB (116210)Benzophenone-312.00
Neo Heliopan® HMS (182573)Homosalate15.00
Edeta BDDisodium EDTA50.10
Carbopol ETD 2050Carbomer60.30
Keltrol TXanthan Gum70.10
B
ProductINCISupplier%
Water DistilledWater (Aqua) 60.70
Glycerin 99,5 P.Glycerin 3.00
IBR-dormin® (158383)Water (Aqua), Narcissus Tazetta Bulb Extract12.00
Neo Heliopan® Hydro (103089) used as a 30% aq. solution neutralised with TriethanolaminePhenylbenzimidazole Sulfonic Acid15.00
C
ProductINCISupplier%
Triethanolamine 99 %Triethanolamine 1.00
D
ProductINCISupplier%
Symdiol® 68 (108580)1,2-Hexanediol, Caprylyl Glycol11.00
E
ProductINCISupplier%
FragranceParfum10.20
SymRelief® (170015)Bisabolol, Zingiber Officinale (Ginger) Root Extract10.10
SymGlucan® (151719)Water (Aqua), Glycerin, Beta-Glucan11.00

Preparation:
Procedure
Production in a Becomix Mini Lab RW 2,5:
Phase A: Heat up to 85°C (without Carbopol nd Keltrol) until all ingredients
completely dissolved. Transfer into the preheated Becomix, add Carbopol and
Keltrol and homogenise. (Heating 85°C, Stirrer 1 m/S, Homogeniser 10m/s;
3 min, Vacuum -0.8 bar)
Phase B: Heat on a hotplate to 85°C. Add Phase B to part A via the funnel.
(Heating 85°C, Stirrer 1 m/S, Vacuum -0.8 bar)
Phase C: Add directly via the funnel.
Part D: Add directly to part A/B/C. Homogenise the product for 5 minutes.
(Heating 85°C, Stirrer 1 m/S, Vacuum -0.5 bar, Homogeniser 10 m/s; 5 min)
Cool down to ambient temperature.
Phase E: At ambient temperature add Phase D and homogenise. Ventilate and
remove the product with homogenising. (Stirrer 1 m/S, Vacuum -0.8 bar,
Homogeniser 10 m/s; 5 min, Homogeniser 2 m/s; 3 min).
The pH value of the finished product should be approx. 7.5
and has to be checked.
Preparation of the 30% Neo Heliopan Hydro solution:
52.25% Water, demineralised
17.75% Triethanolamine
30.00% Neo Heliopan Hydro (103089)
Dissolve two thirds of triethanolamine in water. Then add with stirring Neo Heliopan Hydro. Add the rest of triethanolamine until the solution becomes
clear. The pH value of the finished Neo Heliopan Hydro solution should be
7.5 - 8.0 and has to be checked. For longer time of storage it is advisable to
add preservatives (eg Parabens) to the solution.
(For example: 6.67% of the 30% Neo Heliopan Hydro solution neutralised
with triethanolamine equals 2% active.)

Properties
pH: 7.5

Notes:
Suppliers
1 Symrise GmbH & Co. KG
2 Degussa-Goldschmidt AG
3 Cognis Dtl. GmbH
4 Dow Corning GmbH
5 BASF AG
6 Noveon
7 CP-Kelco

Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacurers. Continued use of this web site infers acceptance of this disclaimer.
Search