Be My BB

Univar

Phase 
A
ProductINCISupplier%
Dow Corning® 5329 Performance ModifierPEG-12 DimethiconeDow Corning / Univar4
Dow Corning® 5200 Formulation AidLauryl PEG/PPG-18/18 MethiconeDow Corning / Univar0.5
Dow Corning® 2503 Cosmetic WaxStearyl Dimethicone (and) OctadeceneDow Corning / Univar3
Dow Corning® MQ-1640 Flake ResinTrimethylsiloxysilicate (and) PolypropylsilsesquioxaneDow Corning / Univar4
Dow Corning® FZ 3196Caprylyl MethiconeDow Corning / Univar4
Dow Corning® 9701 Cosmetic PowderDimethicone/Vinyl Dimethicone Crosspolymer (and) SilicaDow Corning / Univar4
Pomegranate Seed OilPunica granatum (pomegranate) seed oilKerfoot / Univar0.5
Escalol 557Ethylhexyl MethoxycinnamateAshland / Univar5
Pomegranate SYPerfumKao Perfum / Univar0.6
B
ProductINCISupplier%
Distillated WaterAqua 59
GLC 99GlycerinKAO / Univar3
Aculyn 88Acrylates/Steareth-20 Methacrylates CrosspolymerDow Personal Care / Univar4
NaOH (10% solution in water)Sodium HydroxideUnivar0.4
Germaben IIPropylene glycol (and) Diazonidinyl Urea (and)Methylparaben (and) PropylparabenISP / Univar0.5
C
ProductINCISupplier%
PGSS-22 Black n°710PIron Oxides (and) PEG-10 Propyltrimethoxylane (and) Hydrated SilicaDaito Kasei0.1
PGSS-22 Red n°211PIron Oxides (and) PEG-10 Propyltrimethoxylane (and) Hydrated SilicaDaito Kasei0.4
PGSS-22 TiO2 R250 V2Titanium Dioxade (and) Aluminium Hydroxide (and) PEG-10 Propyltrimethoxylane (and) Hydrated SilicaDaito Kasei6
PGSS-22 Yellow n°602PTitanium Dioxade (and) Aluminium Hydroxide (and) PEG-10 Propyltrimethoxylane (and) Hydrated SilicaDaito Kasei1

Preparation:
(Use gentle stirring to avoid air incorporation)
1. Weigh and heat phase A and B in
separate vessels to 60°C. Mix both
phases until homogeneous.
2. Slowly add phase A into phase B under
vigorous stirring. Homogenize 1
min/100 gr.
3. Mix phase C ingredients together under
vigorous stirring until homogeneous.
4. Add phase C to A/B under stirring.

Notes:
Stable for at least 3 months at room
temperature and 40°C.
Viscosity: 48 000 mPa.s (Brookfield
RVDV-II+ Pro, spindle n°5, 6 rpm, 1 min)
pH = 6.5

Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacurers. Continued use of this web site infers acceptance of this disclaimer.
Search