Facial Moisturizer with Sodium Lactate, Sodium Gluconate and CITROFOL® AI

Jungbunzlauer

Phase 
A
ProductINCISupplier%
Water, deionised  74.60
XG FEDCS – PCXanthan GumJungbunzlauer0.20
Sodium GluconateSodium GluconateJungbunzlauer1.50
Sodium L(+)-Lactate 60%Sodium LactateJungbunzlauer1.50
B
ProductINCISupplier%
Lanette OCetearyl AlcoholCognis5.00
Axol C 62 PelletsGlyceryl Stearate CitrateEvonik1.50
Tegin M PelletsGlyceryl StearateEvonik2.50
Tegosoft MMMyristyl MyristateEvonik1.00
CITROFOL® AITriethyl CitrateJungbunzlauer3.00
Myritol 318Caprylic/Capric TriglycerideCognis5.00
Abil Wax 9840Cetyl DimethiconeEvonik0.50
C
ProductINCISupplier%
Tego Carbomer 134CarbomerEvonik0.20
CITROFOL® AITriethyl CitrateJungbunzlauer1.00
D
ProductINCISupplier%
Perfume, Preservation  qs
E
ProductINCISupplier%
NaOH 10%Sodium HydroxideMerckqs

Preparation:
1. Heat Phase A up to 80°C.
2. Heat Phase B up to 80°C.
3. Emulsify Phase B under stirring slowly to Phase A.
4. Homogenize for 2 – 5 min. by using an Ultra Turrax.
5. Premix Phase C.
6. Cool down to 35°C and add Phase C and Phase D under stirring.
7. Set pH value with Phase E

Notes:
Technical Data:
Appearance: white cream
pH value: 5.5 – 6.0
Viscosity (HAAKE RheoStress® 1; Method 10/s): 8000 mPa.s
Stability:
Stable for 3 months at 20°C, 4°C and 40°C,
1 month at 45°C

Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacurers. Continued use of this web site infers acceptance of this disclaimer.
Search