Broad Spectrum SPF 40, PFA (PPD) 24 Sunscreen Cream Formula JZ3-15B
The HallStar Company
| Phase | |
| A |
| Product | INCI | Supplier | % |
| Finsolv® TN | C12-15 Alkyl Benzoate | | 10.00 |
| Neo Heliopan® 303 | Octocrylene [Octocrylene] | | 2.80 |
| SolaStay® S1 | Ethylhexyl Methoxycrylene | | 3.40 |
|
| B |
| Product | INCI | Supplier | % |
| TTO-80A | Titanium Dioxide [Titanium Dioxide], Aluminum Hydroxide | | 4.10 |
|
| C |
| Product | INCI | Supplier | % |
| HallStar® GMS | Glyceryl Stearate | | 0.60 |
| HallStar® GMS SE/AS | Glyceryl Stearate, PEG-100 Stearate | | 2.00 |
| HallStar ®CO-1895 Stearyl Alcohol NF | Stearyl Alcohol | | 0.50 |
| Emulsiphos® | Potassium Cetyl Phosphate, Hydrogenated Palm Glycerides | | 2.00 |
|
| D |
| Product | INCI | Supplier | % |
| Neo Heliopan® 357 | Butyl Methoxydibenzoylmethane [Avobenzone] | | 3.00 |
|
| E |
| Product | INCI | Supplier | % |
| - | Water [Deionized] | | 63.01 |
|
| F |
| Product | INCI | Supplier | % |
| Versene™ NA | Disodium EDTA | | 0.05 |
|
| G |
| Product | INCI | Supplier | % |
| Pemulen® TR-2 Polymer | Acrylates/C10-30 Alkyl Acrylate Crosspolymer | | 0.30 |
|
| H |
| Product | INCI | Supplier | % |
| CoSept™ PEP | Phenoxyethanol, Methylparaben, Ethylparaben, Butylparaben, Propylparaben, Isobutylparaben | | 0.50 |
| Superol™ K Glycerine 99.7% USP/FCC Kosher, | Glycerin | | 4.00 |
|
| I |
| Product | INCI | Supplier | % |
| Potassium Hydroxide | Potassium Hydroxide [10% aqueous] | | 1.74 |
|
| J |
| Product | INCI | Supplier | % |
| MSS-500W | Silica | | 2.00 |
|
Preparation:
In secondary vessel combine A and start mixing. Slowly add B with continued mixing. Heat this oil phase to 80°C, then add phase C ingredients in order. When A–C is homogeneous, add D and mix until totally dissolved.
To the main vessel, add E and start mixing. Add F and, when dissolved, add G. When fully incorporated, start heating to 80°C and add premix of H.
When oil and water phases are uniform and at the defined temperatures, add the oil phase (A–D) to the water phase (E–H) with strong mixing, without aeration. Start homogenizing intensively and start cooling. When the batch is at 45°C, add I and keep homogenizing intensively. Stop homogenizing and resume sweep mixing. Add J and mix well. When the batch is uniform, add deionized water to correct for evaporative losses. Continue mixing until a smooth, homogeneous lotion results. Perform final quality assurance checks.
Notes:
PRODUCT PROPERTIES (25°C)
Appearance: Cream-colored soft cream
Viscosity (RV, T-D, 5, 20 & 100 rpm, cP): 93000, 26000 & 6060
|